Latest heater tube Tenders | Government heater tube Tenders

corporations/Associations/Others

CTN :43461971

13 Jan, 2026 3.03 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing of open air gym equipments in garden of annual part i of sector 44 chandigarh under wdf - providing & fixing of push chair functions: developing the strength of upper limbs, chest and muscle groups of shoulder and back, improving the flexibility and stability of shoulder joints and elbows. good for healing the bending and stretching hindrances of shoulder joints and elbows, muscular atrophy, frozen shoulder, tennis elbows, etc.approaches sit down with your back against the equipment and take hold of the handgrips with both hands and push forward with effort till your arms extend straight. revert slowly.size:-2265x662x2010 mmmaterial: pre galvanized mild steel, material thickness: 3 mm.paint: all weather double layer powder coated paint sealed ball bearing, steel seats for long lasting life. the rate shall include fixing of gym equipment in cement concrete 1:2:4 block of size 5 x 5 complete in all respects to the entire satisfaction of engineer-in-charge., providing & fixing of sur board functions: by swinging both legs together from side to side the surfing board strengthens and develops the lower abdomen hips and thighs, improves balance and co-ordination through core activation approaches: stand on the pedals and grasp the handles with both hands, swing from left to right. size:-1020x800x1480 mmmaterial: pre galvanized mild steel, material thickness: 3 mm.paint: all weather double layer powder coated paint sealed ball bearing, steel footrest / foot paddle for long lasting life.the rate shall include fixing of gym equipment in cement concrete 1:2:4 block of size 5 x 5 complete in all respects to the entire satisfaction of engineer-in-charge., providing and fixing of space walker .space walker complete in all respects having following specifications.6. all pipes should used in the equipments should be galvanised with 3mm thickness.7. multi colour powder coating with polyster paints should be used on all the equipments.8. the foot pedal on all the equipments should be of aluminium only.9. the seats should be made of high quality plastic with colour scheme in yellow or orange.10. the high end bearings such as skf/nbc must be used in all the equipments.1 dimensions- 1100*460*1480mm2 colour- customizable multi colour and complete powder coat3 size of main tube-114*3.75mm steel pipe4 size of supporting tube-38*3mm steel pipe5 there is restrainer inside, swing lever is no.t more than 65degrees and having swing rod is made of 3mm steel tube.6 al alloy protecting covers are used at the top other main tubes to protect from the rainwater7 anti-skid components are used at the pedal parts, the resistance index is greater than 0.5mm8 the distance between two pedals of the adjacent motion is no. less than 100mm.9 anti theft cover is made by stainless steel/high quality plastic10 the minimum height of the edge of swing component is no.t less than 80mm11 hazardous materials like coating agent, rubber are under national newest standard.12 radius of edge is no. less than 3.0 mm.13 the diameter of rotating shaft is no.t less than40mmfunctions: the leg & thigh exerciser provides excellent cardiovascular exercise while developing the leg muscles. allows a full range of movement in the hip joint improving flexibility and strength, without any impact or stress to joints and back. suitable for all ages. the rate shall include fixing of gym equipment in cement concrete 1:2:4 block of size 5 x 5 complete in all respects to the entire satisfaction of engineer-in-charge, providing and fixing of seated pedal trainer leg shaper complete in all respects having following specifications.6. all pipes should used in the equipments should be galvanised with 3mm thickness.7. multi colour powder coating with polyster paints should be used on all the equipments.8. the foot pedal on all the equipments should be of aluminium only.9. the seats should be made of high quality plastic with colour scheme in yellow or orange.10. the high en

corporations/Associations/Others

CTN :43480599

14 Jan, 2026 3.02 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing of open air gym and pcc benches in parks near house no.2870/2 sector 49-d,chandigarh under mplads. work no.114 18th ls. - push chair odf 001functions: developing the strength of upper limbs, chest and muscle groups of shoulder and back, improving the flexibility and stability of shoulder joints and elbows. good for healing the bending and stretching hindrances of shoulder joints and elbows, muscular atrophy, frozen shoulder, tennis elbows, etc.approaches sit down with your back against the equipment and take hold of the handgrips with both hands and push forward with effort till your arms extend straight. revert slowly.size:-2265x662x2010 mm material: pre galvanized mild steel, material thickness: 3 mm.paint: all weather double layer powder coated paint sealed ball bearing, steel seats for long lasting lifeprovision for fixing of gym equipments in cement concrete 1:2:4 blocks of size 5 x5 x1 to the entire satisfaction of the engineer-in-charge, surf board by swinging both legs together from side to side the surfing board strengthens and develops the lower abdomen hips and thighs, improves balance and co-ordination through core activation approaches: stand on the pedals and grasp the handles with both hands, swing from left to right. size:-1020x800x1480 mmmaterial: pre galvanized mild steel, material thickness: 3 mm.paint: all weather double layer powder coated paint sealed ball bearing, streel footrest/foot paddle for long lasting life.provision for fixing of gym equipments in cement concrete 1:2:4 blocks of size 5 x5 x1 to the entire satisfaction of the engineer-in-charge, space walker .space walker complete in all respects having following specifications.all pipes should used in the equipments should be galvanised with 3mm thickness.multi colour powder coating with polyster paints should be used on all the equipments.the foot pedal on all the equipments should be of aluminium only.the seats should be made of high quality plastic with colour scheme in yellow or orange.the high end bearings such as skf/nbc must be used in all the equipments.1 dimensions- 1100*460*1480mm2 colour- customizable multi colour and complete powder coat3 size of main tube-114*3.75mm steel pipe4 size of supporting tube-38*3mm steel pipe5 there is restrainer inside, swing lever is not more than 65degrees and having swing rod is made of 3mm steel tube.6 al alloy protecting covers are used at the top other main tubes to protect from the rainwater7 anti-skid components are used at the pedal parts, the resistance index is greater than 0.5mm8 the distance between two pedals of the adjacent motion is no less than 100mm.9 anti theft cover is made by stainless steel/high quality plastic10 the minimum height of the edge of swing component is not less than 80mm11 hazardous materials like coating agent, rubber are under national newest standard.12 radius of edge is no less than 3.0 mm.13 the diameter of rotating shaft is not less than40mmfunctions: the leg & thigh exerciser provides excellent cardiovascular exercise while developing the leg muscles. allows a full range of movement in the hip joint improving flexibility and strength, without any impact or stress to joints and back. suitable for all ages. approaches: hold the crossbeam with both hands and swing your legs backwards and forwards in a walking motion.provision for fixing of gym equipments in cement concrete 1:2:4 blocks of size 5 x5 x1 to the entire satisfaction of the engineer-in-charge, seated pedal trainer leg shaper complete in all respects having following specifications.all pipes should used in the equipments should be galvanised with 3mm thickness.multi colour powder coating with polyster paints should be used on all the equipments.the foot pedal on all the equipments should be of aluminium only.the seats should be made of high quality plastic with colour scheme in yellow or orange.the high end bearings such as skf/nbc must be used in all the equipments.1 dimensions- 1730

Central Government / Public Sector

CTN :43379380

20 Jan, 2026 NA

Vadodara - Gujarat

Tender For corrigendum : providing of custom bid for services - 9030c25d68 mechanical decoking and inspection of the convection section of the heater tubes using in line pigs

CTN :43483596

17 Jan, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of studded heater tubes

State Government

CTN :42833325

15 Jan, 2026 4.60 Lacs

Anuppur - Madhya Pradesh

Tender For corrigendum : work of acoustic eye ultra fast inspection of hp heater tubes in aoh of unit no. 5 of atps mppgcl chachai.

Co-operative

CTN :43363857

13 Jan, 2026 17.00 Lacs

Bengaluru - Karnataka

Tender For supply, installation & commissioning of air pre heater tube & related works at boiler section to cattle feed plant at shikaripura

corporations/Associations/Others

CTN :43430340

19 Jan, 2026 NA

Atthipattu Puthunagar - Tamil Nadu

Tender For erosion protection shield for re-heater tube, ltsh tube and economizer tube in boilererosion protection shield for re-heater tube, ltsh tube and economizer tube in boiler

Central Government/Public Sector

CTN :43439126

26 Jan, 2026 NA

Ratlam - Madhya Pradesh

Tender For tender for supply of electric water geyser tank capacity 15 liter. as per detailed description/specification attached. brand bajaj endure series gracio , havells bianca, v-guard pebble shine smart geyser, , 11 kv ab cum do fuse 200a as per is-9385 part ii/1980, polymer insulator, number of pole 3 each pole consist of galvanized steel base, designed for pole mounting & off load disconnection , power contactors, ac rating (ampere)32, coil voltage 240 vac, contact voltage 415 vac, number of poles 3, single phase, wa make - bch electric,l&t, abb,schneider, legrand, havells material shall be supplied with oem-test report , time switch with permanent on/auto/off with led back light, operating voltage 240, 50hz, output voltage 16 amp, make gic, selec, indiasian , 2 x 18 watt fly catcher complete with tube, heavy duty stainless steel body approximate size 24.5x8x17 inches size- 3 mm with heavy duty transformer and electronic ballast minimum warranty 02 years. make - spectrum, bajaj, (warranty period : up to 30 months from the date of supply) material shall be supplied with oem-test report

CTN :43433109

19 Jan, 2026 NA

Chennai - Tamil Nadu

Tender For erosion protection shield for re-heater tube, ltsh tube and economizer tube in boiler

CTN :43290929

12 Jan, 2026 NA

Ernakulam - Kerala

Tender For tender for supply of heater tube support : : - wall tube hanger 1623/401 hk40 mhh01 , wall tube hanger 1624/205 gr.50 mnh01 , wall tube hanger 1624/206 gr.50 mhh01 , tube spacer hk40 1623/104 mrh01/02/03/04 , tube spacer hk40 1623/105 mrh01/02/03/04 , tube spacer hk40 1623/101 mrh01/02/03/04 , tube spacer hk40 1623/102 mrh01/02/03/04

Heater Tube Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

corporations/Associations/Others

Central Government / Public Sector

State Government

Co-operative

corporations/Associations/Others

Central Government/Public Sector